※Please choose new JIS key, the old JIS key
■Type H-P Dimension Table
standard part's attachment: spring-pin 4 pieces
φdH7 | φD | Ⅰ | ℓ | E | H | F Slide distance |
φA | S | SP | Dimension of spring-pin for fixing |
New JIS key | Old JIS key | TAP M |
MAX | MIN | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
aJS9 | b | aJS9 | b | L1 0 -F |
L2 | L3 | L1 0 -F |
|||||||||||||
H-6P | 6 | 12.5 | 20 | 13 | 43.5 | 8.5 | 25 | 6 | 60 | Large diameter6 m=0.5 z=10 |
2×12 | 2 | 1.0 | 2 | 1.0 | M3 | 252 | 212 | 150 | 148.5 |
H-8P | 8 | 16 | 25 | 16.5 | 50.5 | 10.5 | 25 | 8 | 70 | Large diameter8 m=0.5 z=14 |
2.5×16 | 3 | 1.4 | 3 | 1.5 | M3 | 423.5 | 373.5 | 300 | 175.5 |
H-10P | 10 | 20 | 28 | 17 | 65 | 20 | 30 | 10 | 80 | Large diameter10 m=0.5 z=18 |
3×20 | 3 | 1.4 | 4 | 1.5 | M4 | 440 | 384 | 300 | 207 |
H-12P | 12 | 25 | 35.5 | 22 | 85 | 25 | 35 | 12 | 80 | Large diameter12 m=0.75 z=14 |
4×25 | 4 | 1.8 | 4 | 1.5 | M4 | 580 | 509 | 400 | 262 |
H-16P | 16 | 32 | 40 | 23 | 95 | 30 | 40 | 16 | 75 | 13×16×3.5×6 | 5×32 | 5 | 2.3 | 5 | 2.0 | M5 | 602 | 522 | 400 | 295 |
H-20P | 20 | 40 | 50 | 28 | 110 | 40 | 45 | 22 | 90 | 18×22×5×6 | 6×40 | 6 | 2.8 | 5 | 2.0 | M6 | 842 | 742 | 600 | 355 |
H-25P | 25 | 50 | 63 | 36 | 125 | 40 | 60 | 30 | 100 | 23×28×6×6 | 8×50 | 8 | 3.3 | 7 | 3.0 | M8 | 1101 | 975 | 800 | 437 |
H-30P | 30 | 57 | 82.5 | 51 | 140 | 55 | 60 | 35 | 115 | 28×34×7×6 | 10×60 | 8 | 3.3 | 7 | 3.0 | M8 | 1164 | 999 | 800 | 530 |
・MAX L1 = Maximumlengthin which the sliding stroke F of standard part is kept.
・MIN L1=・Minimum length in which a shaft and a sleeve are cut and the engaged distance H and sliding stroke F are kept.
※You may download 3D CAD drawings by clicking on the part number of interest.