※Please choose new JIS key, the old JIS key
■Type K-P Dimension Table
standard part's attachment : spring-pin 4 pieces
φdH7 | φD | Ⅰ | ℓ | E | H | F Slide distance |
φA | S | SP | Dimension of spring-pin for fixing |
New JIS key | Old JIS key | TAP M |
MAX | MIN | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
aJS9 | b | aJS9 | b | L1 0 -F |
L2 | L3 | L1 0 -F |
|||||||||||||
K-10P | 10 | 20 | 31 | 19 | 65 | 20 | 30 | 10 | 80 | Large diameter10 m=0.5 z=18 |
3×20 | 3 | 1.4 | 4 | 1.5 | M4 | 450 | 388 | 300 | 219 |
K-12P | 12 | 25 | 37 | 23.5 | 85 | 25 | 35 | 12 | 80 | Large diameter12 m=0.75 z=14 |
4×25 | 4 | 1.8 | 4 | 1.5 | M4 | 584.5 | 510.5 | 400 | 268 |
K-16P | 16 | 32 | 52 | 34.5 | 95 | 30 | 40 | 16 | 75 | 13×16×3.5×6 | 5×32 | 5 | 2.3 | 5 | 2.0 | M5 | 638.5 | 534.5 | 400 | 343 |
K-20P | 20 | 42 | 62 | 37.5 | 110 | 40 | 45 | 22 | 90 | 18×22×5×6 | 6×40 | 6 | 2.8 | 5 | 2.0 | M6 | 880.5 | 756.5 | 600 | 403 |
K-25P | 25 | 50 | 70 | 39.5 | 125 | 40 | 60 | 30 | 100 | 23×28×6×6 | 8×50 | 8 | 3.3 | 7 | 3.0 | M8 | 1125.5 | 985.5 | 800 | 465 |
K-30P | 30 | 60 | 89 | 52.5 | 140 | 55 | 60 | 35 | 115 | 28×34×7×6 | 10×60 | 8 | 3.3 | 7 | 3.0 | M8 | 1188.5 | 1010.5 | 800 | 556 |
・MAX L1 = Maximumlengthin which the sliding stroke F of standard part is kept.
・MIN L1=Minimum length in which a shaft and a sleeve are cut and the engaged distance H and sliding stroke F are kept.
※You may download 3D CAD drawings by clicking on the part number of interest.