Products

Standard Type Universal Joint

Join Slide SPS Series

  • The spline effective length should be carefully considered when you cut a sleeve and a shaft.
  • This type can be used for the application where sliding movement occurs while rotating.
  • SPSA Unit　
    Material：Material S-45C・SPS (spline shaft)・SPA (spline sleeve) with boss

    SPSO Unit
    Material：S-45C・SPS (spline shaft)・SPO (spline sleeve)

■Type SPSA Dimension Table

SPSA-5 Large diameter5m=0.5  z=8 5 150 50 100 5 10 18 42.5 7.5 25
SPSA-6 Large diameter6m=0.5  z=10 6 150 60 90 6 12 18 43.5 8.5 25
SPSA-8 Large diameter8m=0.5  z=14 8 300 70 230 8 16 19 50.5 10.5 25
SPSA-10 Large diameter10m=0.5  z=18 10 300 80 220 10 20 23 65 20 30
SPSA-12 Large diameter12m=0.75 z=14 12 400 80 320 12 24 29 85 25 35
SPSA-14 11×14×3.0×6 14 400 65 335 14 28 31.5 90 25 40
SPSA-16 13×16×3.5×6 16 400 75 325 16 32 34.5 95 30 40
SPSA-18 16×20×4.0×6 20 600 85 515 18 36 40 105 35 45
SPSA-20 18×22×5.0×6 22 600 90 510 20 40 40 110 40 45
SPSA-22 21×25×5.0×6 25 800 95 705 22 44 41 115 40 50
SPSA-25 23×28×6.0×6 30 800 100 700 25 50 43 125 40 60
SPSA-30 28×34×7.0×6 35 800 115 685 30 60 56 140 55 60

■Type SPSO Dimension Table

SPSO-5 Large diameter5m=0.5  z=8 5 150 50 100 10.1 5.9 42.5 7.5 25 10
SPSO-6 Large diameter6m=0.5  z=10 6 150 60 90 12.1 8.4 43.5 8.5 25 10
SPSO-8 Large diameter8m=0.5  z=14 8 300 70 230 16.1 9.9 50.5 10.5 25 15
SPSO-10 Large diameter10m=0.5  z=18 10 300 80 220 20.1 12 65 20 30 15
SPSO-12 Large diameter12m=0.75 z=14 12 400 80 320 24.1 15 70 25 35 10
SPSO-14 11×14×3.0×6 14 400 65 335 28 17 75 25 40 10
SPSO-16 13×16×3.5×6 16 400 75 325 32 20 80 30 40 10
SPSO-18 16×20×4.0×6 20 600 85 515 36 23 90 35 45 10
SPSO-20 18×22×5.0×6 22 600 90 510 40 25 95 40 45 10
SPSO-22 21×25×5.0×6 25 800 95 705 44 27 100 40 50 10
SPSO-25 23×28×6.0×6 30 800 100 700 50 31 110 40 60 10
SPSO-30 28×34×7.0×6 35 800 115 685 60 38 125 55 60 10

※You may download 3D CAD drawings by clicking on the part number of interest.