miyoshi kikai | Products | Standard Type Universal Joint

- Complying with JIS & Original Type
  The standard joint which is used in industrial equipment.
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- It is a joint system part for multi-purpose.
  
  PIJON LIST

Anti-wear Type HJD

bootsBoots
axisAxial attachment
additionAdd process
60°Most curve angle Up to 60°
30°Most curve angle Up to 30°

JIS-B1454typeCC Material SCM415　　　Entirely Quenched, Anti-wear Use

In order to increase the fatigue strength, parts are entirely quenched.
Parts cannot be machined because they are entirely quenched.
Designate new JIS or old JIS for key, when the type of shaft-hole shape is T.
A strong-pin or a shear-pin is not attached for a joint with a key way.

■Type HJD Dimension Table

Attachment ：strong-pin 1 piece 、shear-pin1 piece 、check ring 2 pieces

	φd^H7	φD	L	ℓ	Ⅰ	F	e	φP^H8 m6	New JIS key		Old JIS key		TAP M	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
	φd^H7	φD	L	ℓ	Ⅰ	F	e	φP^H8 m6	a^E9	b	a^E9	b	TAP M	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
HJD-6	6	12	49.5	9	15.5	18.5	4.5	3	-	-	-	-	-	0.10	0.03	1400	6
HJD-8	8	15	58	10	18	22	5	3.5	3	1.4	3	1.5	M3	0.10	0.05	1250	10
HJD-10	10	19	67.5	11	21	25.5	6	4.5	3	1.4	4	1.5	M4	0.10	0.09	1000	24
HJD-12	12	23	83	13	26	31	7.5	5	4	1.8	4	1.5	M4	0.10	0.17	830	31
HJD-14	14	26	94.5	16	29.5	35.5	8.5	5.8	5	2.3	5	2.0	M5	0.10	0.24	730	46
HJD-16	16	30	117.5	20	37	43.5	11	6.5	5	2.3	5	2.0	M5	0.10	0.40	630	73
HJD-18	18	33	129	23.5	40.5	48	11.7	7	6	2.8	5	2.0	M6	0.10	0.51	570	110
HJD-20	20	36	139	25	43.5	52	12.5	8	6	2.8	5	2.0	M6	0.10	0.63	530	137
HJD-22	22	40	150	27	47	56	13.5	9	6	2.8	7	3.0	M8	0.15	0.88	470	186
HJD-25	25	44	168	30	52.5	63	15	10	8	3.3	7	3.0	M8	0.15	1.16	430	255
HJD-30	30	51	195	35	61	73	17.5	11.5	8	3.3	7	3.0	M8	0.15	1.80	380	382

※You may download 3D CAD drawings by clicking on the part number of interest.