■Type MS-L Dimension Table
φdH7 | φD | Ⅰ | ℓ | E | H | F Slide distance |
φP | MAX | MIN | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|
L1 0 -F |
L2 | L3 | L1 0 -F |
|||||||||
MS-2.0L | 2.0 | 6 | 7.5 | 4 | 35 | 5.75 | 18 | 1.5 | 95 | 80 | 42.3 | 83 |
MS-2.5L | 2.5 | |||||||||||
MS-3.0L | 3.0 | 6 | 9 | 5.5 | 35 | 5.75 | 18 | 1.5 | 100 | 82 | 43 | 89 |
MS-3.5L | 3.5 | |||||||||||
MS-4.0L | 4.0 | 8 | 12 | 7.2 | 44 | 8 | 24 | 2.0 | 150 | 126 | 77.2 | 116 |
MS-4.5L | 4.5 | |||||||||||
MS-5.0L | 5.0 | 10 | 15 | 9 | 55 | 10.25 | 30 | 2.5 | 190 | 160 | 99 | 145 |
MS-5.5L | 5.5 |
・MAX L1 = Maximumlengthin which the sliding stroke F of standard part is kept.
・MIN L1=Minimum length in which a shaft and a sleeve are cut and the engaged distance H and sliding stroke F are kept.
※You may download 3D CAD drawings by clicking on the part number of interest.