P3（φ3）series
| P3-100［dxf・step］ | P3-101［dxf・step］ | P3-104［dxf・step］ |
| P3-109［dxf・step］ | P3-120［dxf・step］ | P3-121［dxf・step］ |
| P3-600［dxf・step］ | P3-610［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PS(φ6)series
(stainless steel bolt: M3)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| PS200［dxf・step］ | PS201［dxf・step］ | PS202［dxf・step］ |
| PS203［dxf・step］ | PS204［dxf・step］ | PS204M［dxf・step］ |
| PS209［dxf・step］ | PS220［dxf・step］ | PS221［dxf・step］ |
| PS222［dxf・step］ | PS237［dxf・step］ | PS243［dxf・step］ |
| PS254［dxf・step］ | PS255［dxf・step］ | PS264［dxf・step］ |
| PS523［dxf・step］ | PS600［dxf・step］ | PS601［dxf・step］ |
| PS602［dxf・step］ | PS603［dxf・step］ | PS604［dxf・step］ |
| PS620［dxf・step］ | PS720［dxf・step］ | PS721［dxf・step］ |
| PS722［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PE(φ8)series
(stainless steel bolt: M4)
| PE200［dxf・step］ | PE204［dxf・step］ | PE204M［dxf・step］ | |
| PE209［dxf・step］ | PE223［dxf・step］ | PE224［dxf・step］ | |
| PE237［dxf・step］ | PE243［dxf・step］ | PE255［dxf・step］ | |
| PE300［dxf・step］ | PE400［dxf・step］ | PE402［dxf・step］ | |
| PE420［dxf・step］ | PE523［dxf・step］ | PE524［dxf・step］ | |
| PE534［dxf・step］ | PE600［dxf・step］ | PE601［dxf・step］ | PE603［dxf・step］ |
| PE603［dxf・step］ | PE610［dxf・step］ | PE620［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PC(φ9)series
(stainless steel bolt: M4)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| PC200［dxf・step］ | PC201［dxf・step］ | PC202［dxf・step］ |
| PC203［dxf・step］ | PC204［dxf・step］ | PC204M［dxf・step］ |
| PC209［dxf・step］ | PC220［dxf・step］ | PC221［dxf・step］ |
| PC222［dxf・step］ | PC223［dxf・step］ | PC224［dxf・step］ |
| PC237［dxf・step］ | PC243［dxf・step］ | PC254［dxf・step］ |
| PC255［dxf・step］ | PC300［dxf・step］ | PC301［dxf・step］ |
| PC400［dxf・step］ | PC401［dxf・step］ | PC402［dxf・step］ |
| PC420［dxf・step］ | PC523［dxf・step］ | PC524［dxf・step］ |
| PC530［dxf・step］ | PC534［dxf・step］ | PC600［dxf・step］ |
| PC601［dxf・step］ | PC602［dxf・step］ | PC603［dxf・step］ |
| PC608［dxf・step］ | PC609［dxf・step］ | PC610［dxf・step］ |
| PC620［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PF(φ10)series
(stainless steel bolt: M2)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| PF200［dxf・step］ | PF204［dxf・step］ | PF204M［dxf・step］ |
| PF209［dxf・step］ | PF223［dxf・step］ | PF224［dxf・step］ |
| PF237［dxf・step］ | PF238［dxf・step］ | PF243［dxf・step］ |
| PF255［dxf・step］ | PF300［dxf・step］ | PF400［dxf・step］ |
| PF402［dxf・step］ | PF420［dxf・step］ | PF516［dxf・step］ |
| PF523［dxf・step］ | PF524［dxf・step］ | PF530［dxf・step］ |
| PF534［dxf・step］ | PF600［dxf・step］ | PF601［dxf・step］ |
| PF603［dxf・step］ | PF610［dxf・step］ | PF620［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PG(φ12)series
(stainless steel bolt: M4)
| PG200［dxf・step］ | PG204［dxf・step］ | PG204M［dxf・step］ |
| PG209［dxf・step］ | PG224［dxf・step］ | PG225［dxf・step］ |
| PG237［dxf・step］ | PG238［dxf・step］ | PG243［dxf・step］ |
| PG255［dxf・step］ | PG300［dxf・step］ | PG400［dxf・step］ |
| PG402［dxf・step］ | PG420［dxf・step］ | PG515［dxf・step］ |
| PG523［dxf・step］ | PG524［dxf・step］ | PG530［dxf・step］ |
| PG534［dxf・step］ | PG600［dxf・step］ | PG601［dxf・step］ |
| PG603［dxf・step］ | PG610［dxf・step］ | PG620［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PJ(φ13)series
(stainless steel bolt: M4)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| PJ200［dxf・step］ | PJ201［dxf・step］ | PJ202［dxf・step］ |
| PJ203［dxf・step］ | PJ204［dxf・step］ | PJ204M［dxf・step］ |
| PJ209［dxf・step］ | PJ210［dxf・step］ | PJ219［dxf・step］ |
| PJ220［dxf・step］ | PJ221［dxf・step］ | PJ222［dxf・step］ |
| PJ223［dxf・step］ | PJ224［dxf・step］ | PJ225［dxf・step］ |
| PJ237［dxf・step］ | PJ238［dxf・step］ | PJ243［dxf・step］ |
| PJ255［dxf・step］ | PJ260［dxf・step］ | PJ264［dxf・step］ |
| PJ268［dxf・step］ | PJ300［dxf・step］ | PJ301［dxf・step］ |
| PJ305［dxf・step］ | PJ400［dxf・step］ | PJ401［dxf・step］ |
| PJ402［dxf・step］ | PJ403［dxf・step］ | PJ408［dxf・step］ |
| PJ410［dxf・step］ | PJ411［dxf・step］ | PJ420［dxf・step］ |
| PJ421［dxf・step］ | PJ425［dxf・step］ | PJ503［dxf・step］ |
| PJ504［dxf・step］ | PJ505［dxf・step］ | PJ524［dxf・step］ |
| PJ506［dxf・step］ | PJ516［dxf・step］ | PJ507［dxf・step］ |
| PJ508［dxf・step］ | PJ523［dxf・step］ | PJ530［dxf・step］ |
| PJ534［dxf・step］ | PJ600［dxf・step］ | PJ601［dxf・step］ |
| PJ603［dxf・step］ | PJ608［dxf・step］ | |
| PJ609［dxf・step］ | PJ610［dxf・step］ | PJ612［dxf・step］ |
| PJ620［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PK(φ15)series
(stainless steel bolt: M5)
| PK200［dxf・step］ | PK204［dxf・step］ | PK204M［dxf・step］ | |
| PK209［dxf・step］ | PK225［dxf・step］ | PK226［dxf・step］ | |
| PK237［dxf・step］ | PK238［dxf・step］ | PK243［dxf・step］ | |
| PK255［dxf・step］ | PK300［dxf・step］ | PK400［dxf・step］ | |
| PK402［dxf・step］ | PK420［dxf・step］ | PK516［dxf・step］ | |
| PK524［dxf・step］ | PK525［dxf・step］ | PK530［dxf・step］ | |
| PK535［dxf・step］ | PK600［dxf・step］ | PK601［dxf・step］ | |
| PK603［dxf・step］ | PK610［dxf・step］ | PK610［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PN(φ16)series
(stainless steel bolt: M5)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| PN200［dxf・step］ | PN204［dxf・step］ | PN204M［dxf・step］ |
| PN209［dxf・step］ | PN225［dxf・step］ | PN226［dxf・step］ |
| PN237［dxf・step］ | PN238［dxf・step］ | PN243［dxf・step］ |
| PN255［dxf・step］ | PN300［dxf・step］ | PN400［dxf・step］ |
| PN402［dxf・step］ | PN420［dxf・step］ | PN516［dxf・step］ |
| PN524［dxf・step］ | PN525［dxf・step］ | PN530［dxf・step］ |
| PN535［dxf・step］ | PN600［dxf・step］ | PN601［dxf・step］ |
| PN603［dxf・step］ | PN610［dxf・step］ | PN612［dxf・step］ |
| PN620［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PL(φ19)series
(stainless steel bolt: M5)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| PL200［dxf・step］ | PL201［dxf・step］ | PL202［dxf・step］ | |
| PL203［dxf・step］ | PL204［dxf・step］ | PL204M［dxf・step］ | |
| PL204L［dxf・step］ | PL209［dxf・step］ | PL223［dxf・step］ | |
| PL224［dxf・step］ | PL225［dxf・step］ | PL237［dxf・step］ | |
| PL238［dxf・step］ | PL243［dxf・step］ | PL255［dxf・step］ | |
| PL260［dxf・step］ | PL262［dxf・step］ | PL266［dxf・step］ | |
| PL300［dxf・step］ | PL301［dxf・step］ | PL400［dxf・step］ | |
| PL401［dxf・step］ | PL402［dxf・step］ | PL420［dxf・step］ | |
| PL425［dxf・step］ | PL506［dxf・step］ | PL516［dxf・step］ | |
| PL525［dxf・step］ | PL526［dxf・step］ | PL530［dxf・step］ | |
| PL536［dxf・step］ | PL600［dxf・step］ | PL601［dxf・step］ | |
| PL602［dxf・step］ | PL603［dxf・step］ | PL608［dxf・step］ | |
| PL609［dxf・step］ | PL610［dxf・step］ | PL612［dxf・step］ | |
| PL620［dxf・step］ | PL702［dxf・step］ | PL704［dxf・step］ | |
| PL705［dxf・step］ | PL706［dxf・step］ | PL707［dxf・step］ | |
| PL708［dxf・step］ | PL712［dxf・step］ | PL713［dxf・step］ | |
| PL720［dxf・step］ | PL721［dxf・step］ | PL722［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PQ(φ20)series
(stainless steel bolt: M5)
| PQ200［dxf・step］ | PQ204［dxf・step］ | PQ204M［dxf・step］ |
| PQ204L［dxf・step］ | PQ209［dxf・step］ | PQ226［dxf・step］ |
| PQ228［dxf・step］ | PQ237［dxf・step］ | PQ238［dxf・step］ |
| PQ243［dxf・step］ | PQ255［dxf・step］ | PQ300［dxf・step］ |
| PQ400［dxf・step］ | PQ402［dxf・step］ | PQ420［dxf・step］ |
| PQ514［dxf・step］ | PQ526［dxf・step］ | PQ530［dxf・step］ |
| PQ536［dxf・step］ | PQ600［dxf・step］ | PQ601［dxf・step］ |
| PQ603［dxf・step］ | PQ610［dxf・step］ | PQ620［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PH(φ25)series
(stainless steel bolt: M5, M6 / ●: M5)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| PH100［dxf・step］ | PH101［dxf・step］ | PH104［dxf・step］ |
| PH104M［dxf・step］ | PH104L［dxf・step］ | PH109［dxf・step］ |
| PH114［dxf・step］ | PH120［dxf・step］● | PH121［dxf・step］● |
| PH122［dxf・step］ | PH123［dxf・step］ | PH124［dxf・step］ |
| PH125［dxf・step］ | PH126［dxf・step］● | PH127［dxf・step］● |
| PH128［dxf・step］● | PH129［dxf・step］● | PH131［dxf・step］● |
| PH154［dxf・step］ | PH237［dxf・step］● | PH238［dxf・step］● |
| PH260［dxf・step］ | PH320［dxf・step］ | PH321［dxf・step］ |
| PH400［dxf・step］ | PH600［dxf・step］● | PH603［dxf・step］● |
| PH613［dxf・step］● | PH614［dxf・step］● |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PR(φ30)series
(stainless steel bolt: M6 / ●: M8)
| PR100［dxf・step］ | PR104［dxf・step］ | PR120［dxf・step］ |
| PR121［dxf・step］ | PR126［dxf・step］ | PR400［dxf・step］● |
| PR600［dxf・step］● | PR614［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PT(φ32)series
(stainless steel bolt: M6 / ●: M8)
| PT100［dxf・step］ | PT104［dxf・step］ | PT120［dxf・step］ |
| PT121［dxf・step］ | PT126［dxf・step］ | PT400［dxf・step］● |
| PT600［dxf・step］● | PT614［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
PU(φ35)series
(stainless steel bolt: M8 / ●: M6)
| PU100［dxf・step］ | PU104［dxf・step］ | PU120［dxf・step］ |
| PU121［dxf・step］ | PU126［dxf・step］ | PU400［dxf・step］ |
| PU600［dxf・step］ | PU614［dxf・step］● |
* For 300, 400 type, please match the mark on both edge phase on assembly.
Different bore type
more compact and lighter with combination of different diameter shaft
(link fromφ6 toφ35)
(link fromφ6 toφ35)
CS(φ6・φ9)series
(stainless steel bolt: M3, M4)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| CS200［dxf・step］ | CS201［dxf・step］ | CS204［dxf・step］ |
| CS204M［dxf・step］ | CS209［dxf・step］ | CS254［dxf・step］ |
| CS401［dxf・step］ | CS402［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
CE(φ8・φ9)series
(stainless steel bolt: M4)
| CE200［dxf・step］ | CE204［dxf・step］ | CE204M［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
GE(φ8・φ12)series
(stainless steel bolt: M4)
| GE200［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
FC(φ9・φ10)series
(stainless steel bolt: M4)
| FC200［dxf・step］ | FC204［dxf・step］ | FC204M［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
JC(φ9・φ１３)series
(stainless steel bolt: M4)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| JC200［dxf・step］ | JC201［dxf・step］ | JC204［dxf・step］ |
| JC204M［dxf・step］ | JC209［dxf・step］ | JC254［dxf・step］ |
| JC300［dxf・step］ | JC401［dxf・step］ | JC402［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
GF(φ10・φ12)series
(stainless steel bolt: M4)
| GF200［dxf・step］ | GF204［dxf・step］ | GF204M［dxf・step］ |
| GF400［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
JF(φ10・φ13)series
(stainless steel bolt: M4)
| JF200［dxf・step］ | JF204［dxf・step］ | JF204M［dxf・step］ |
| JF400［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
KF(φ10・φ15)series
(stainless steel bolt: M5)
| KF200［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
JG(φ12・φ13)series
(stainless steel bolt: M4)
| JG200［dxf・step］ | JG204［dxf・step］ | JG204M［dxf・step］ |
| JG400［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
NG(φ12・φ16)series
(stainless steel bolt: M5)
| NG200［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
LJ(φ13・φ19)series
(stainless steel bolt: M4,M5)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| LJ200［dxf・step］ | LJ201［dxf・step］ | LJ204［dxf・step］ |
| LJ204M［dxf・step］ | LJ352［dxf・step］ | LJ401［dxf・step］ |
●φ13、φ19の2方向をしっかり締め付ける時はLJ401を使用してください
* For 300, 400 type, please match the mark on both edge phase on assembly.
* For 300, 400 type, please match the mark on both edge phase on assembly.
NK(φ15・φ16)series
(stainless steel bolt: M5)
| NK200［dxf・step］ | NK204［dxf・step］ | NK204M［dxf・step］ |
| NK400［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
QK(φ15・φ20)series
(stainless steel bolt: M5)
| QK200［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
QL(φ19・φ20)series
(stainless steel bolt: M5)
| QL200［dxf・step］ | QL204［dxf・step］ | QL204M［dxf・step］ |
| QL204L［dxf・step］ | QL400［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
HL(φ19・φ25)series
(stainless steel bolt: M5, M6 / ●: M5)
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
Easy-work with using both left and right-tightening in pairs, in case of symmetry.
| HL100［dxf・step］ | HL101［dxf・step］ | HL104［dxf・step］ |
| HL104M［dxf・step］ | HL104L［dxf・step］ | HL110［dxf・step］● |
| HL154［dxf・step］● | HL300［dxf・step］● |
* For 300, 400 type, please match the mark on both edge phase on assembly.
HN(φ16・φ25)series
(stainless steel bolt: M6)
| HN100［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
RH(φ25・φ30)series
(stainless steel bolt: M6)
| RH100［dxf・step］ | RH104［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
TR(φ30・φ32)series
(stainless steel bolt: M6)
| TR100［dxf・step］ | TR104［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
UT(φ32・φ35)series
(stainless steel bolt: M8)
| UT100［dxf・step］ | UT104［dxf・step］ |
* For 300, 400 type, please match the mark on both edge phase on assembly.
Screw- stopper type
| CE200ST［dxf・step］ | PC200ST［dxf・step］ | PC201ST［dxf・step］ |
| FC200ST［dxf・step］ | JC200ST［dxf・step］ | JC201ST［dxf・step］ |
| PF200ST［dxf・step］ | GF200ST［dxf・step］ | JF200ST［dxf・step］ |
| PG200ST［dxf・step］ | JG200ST［dxf・step］ | PJ200ST［dxf・step］ |
| PJ201ST［dxf・step］ | LJ200ST［dxf・step］ | LJ201ST［dxf・step］ |
| PK200ST［dxf・step］ | NK200ST［dxf・step］ | PN200ST［dxf・step］ |
| PL200ST［dxf・step］ | PL201ST［dxf・step］ | QL200ST［dxf・step］ |
| HL100ST［dxf・step］ | HL101ST［dxf・step］ | PQ200ST［dxf・step］ |
| PH100ST［dxf・step］ | PH101ST［dxf・step） |
Easy-work with using both left and right-tightening in pairs, in case of symmetry.