miyoshi kikai | Products | Standard Type Universal Joint

- Complying with JIS & Original Type
  The standard joint which is used in industrial equipment.
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- It is a joint system part for multi-purpose.
  
  PIJON LIST

Precision Type S

bootsBoots
axisAxial attachment
additionAdd process
60°Most curve angle Up to 60°
30°Most curve angle Up to 30°

JIS-B1454typeA High Precision Compact Use

When machining is required, make sure to refer to the description of “request and advice for machining type S and D” on the above link.
A hole for a spring-pin attached should be machined together with a shaft at a location of ℓ/2.
Use a boot and oil pack to extend the life of joint.
Designate new JIS or old JIS for key, when the type of shaft-hole shape is B or T.
A spring-pin is not attached for a joint with a key way.

■Type S Dimension Table

Attachment ： spring-pin 2 pieces

	φd^H7	φD	L	ℓ	New JIS key		Old JIS key		TAP M	Dimension of spring-pin for fixing	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
	φd^H7	φD	L	ℓ	a^Js9	b	a^Js9	b	TAP M	Dimension of spring-pin for fixing	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
S-6	6	16	34	9	2	1.0	2	1.0	M3	2×16	0.10	0.04	2100	7
S-8	8	18	40	11	3	1.4	3	1.5	M3	2.5×16	0.10	0.06	1900	12
S-10	10	22	45	12	3	1.4	4	1.5	M4	3×20	0.10	0.09	1500	21
S-12	12	26	50	13	4	1.8	4	1.5	M4	4×25	0.10	0.15	1300	31
S-14	14	29	56	16	5	2.3	5	2.0	M5	5×28	0.10	0.20	1150	54
S-16	16	32	65	18	5	2.3	5	2.0	M5	5×32	0.10	0.28	1000	69
S-18	18	37	72	20	6	2.8	5	2.0	M6	6×35	0.10	0.41	880	98
S-20	20	42	82	23	6	2.8	5	2.0	M6	6×40	0.10	0.61	770	127
S-22	22	47	95	25	6	2.8	7	3.0	M8	6×45	0.10	0.91	690	196
S-25	25	52	108	29	8	3.3	7	3.0	M8	8×50	0.10	1.23	630	265
S-30	30	58	122	34	8	3.3	7	3.0	M8	10×60	0.14	1.64	560	343
S-35	35	70	140	39	10	3.3	10	3.5	M10	10×70	0.14	2.78	460	490
S-40	40	80	160	44	12	3.3	10	3.5	M10	10×80	0.14	4.17	410	834
S-45	45	88	175	49	14	3.8	12	3.5	M10	12×90	0.20	5.42	370	1177
S-50	50	95	190	54	14	3.8	12	3.5	M12	12×100	0.20	6.76	340	1373
S-60	60	115	220	66	18	4.4	15	5.0	M12	13×120	0.20	11.50	280	2157

※You may download 3D CAD drawings by clicking on the part number of interest.