miyoshi kikai | Products | Standard Type Universal Joint

- Complying with JIS & Original Type
  The standard joint which is used in industrial equipment.
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- It is a joint system part for multi-purpose.
  
  PIJON LIST

Precision Type H

bootsBoots
axisAxial attachment
additionAdd process
60°Most curve angle Up to 60°
30°Most curve angle Up to 30°

Conforming to JIS-B1454typeB Material SCM435

A hole for a spring-pin attached should be machined together with a shaft at a location of ℓ/2.
Use a boot and oil pack to extend the life of joint.
Designate new JIS or old JIS for key, when the type of shaft-hole shape is B or T.
A spring-pin is not attached for a joint with a key way.

■Type H Dimension Table

Attachment ： spring-pin 2 pieces

	φd^H7	φD	L	ℓ	New JIS key		Old JIS key		TAP M	Dimension of spring-pin for fixing	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
	φd^H7	φD	L	ℓ	a^Js9	b	a^Js9	b	TAP M	Dimension of spring-pin for fixing	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
H-6	6	12.5	40	13	2	1.0	2	1.0	M3	2×12	0.05	0.03	2000	9
H-8	8	16	50	16.5	3	1.4	3	1.5	M3	2.5×16	0.05	0.05	1800	19
H-10	10	20	56	17	3	1.4	4	1.5	M4	3×20	0.07	0.09	1450	34
H-12	12	25	71	22	4	1.8	4	1.5	M4	4×25	0.07	0.18	1200	60
H-16	16	32	80	23	5	2.3	5	2.0	M5	5×32	0.07	0.33	900	147
H-20	20	40	100	28	6	2.8	5	2.0	M6	6×40	0.10	0.64	720	265
H-25	25	50	126	36	8	3.3	7	3.0	M8	8×50	0.10	1.25	580	520
H-30	30	57	165	51	8	3.3	7	3.0	M8	10×60	0.12	2.18	510	804

※You may download 3D CAD drawings by clicking on the part number of interest.