miyoshi kikai | Products | Standard Type Universal Joint

- Complying with JIS & Original Type
  The standard joint which is used in industrial equipment.
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- It is a joint system part for multi-purpose.
  
  PIJON LIST

Precision Type D

bootsBoots
axisAxial attachment
additionAdd process
60°Most curve angle Up to 60°
30°Most curve angle Up to 30°

JIS-B1454typeAA　High Precision Compact Use

When machining is required, make sure to refer to the description of “request and advice for machining type S and D” on the above link.
A hole for a spring-pin attached should be machined together with a shaft at a location of ℓ/2.
Use a boot and oil pack to extend the life of joint.
Designate new JIS or old JIS for key, when the type of shaft-hole shape is B or T.
A spring-pin is not attached for a joint with a key way.

■Type D Dimension Table

Attachment ： spring-pin 2 pieces

	φd^H7	φD	L	ℓ	Ⅰ	F	New JIS key		Old JIS key		TAP M	Dimension of spring-pin for fixing	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
	φd^H7	φD	L	ℓ	Ⅰ	F	a^Js9	b	a^Js9	b	TAP M	Dimension of spring-pin for fixing	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
D-6	6	16	50	9	17	16	2	1.0	2	1.0	M3	2×16	0.10	0.05	1500	5
D-8	8	18	60	11	20	20	3	1.4	3	1.5	M3	2.5×16	0.10	0.08	1400	9
D-10	10	22	70	12	22.5	25	3	1.4	4	1.5	M4	3×20	0.10	0.14	1100	16
D-12	12	26	80	13	25	30	4	1.8	4	1.5	M4	4×25	0.10	0.23	900	25
D-14	14	29	88	16	28	32	5	2.3	5	2.0	M5	5×28	0.10	0.31	810	41
D-16	16	32	100	18	32.5	35	5	2.3	5	2.0	M5	5×32	0.10	0.43	740	54
D-18	18	37	112	20	36	40	6	2.8	5	2.0	M6	6×35	0.10	0.64	640	78
D-20	20	42	127	23	41	45	6	2.8	5	2.0	M6	6×40	0.10	0.92	560	118
D-22	22	47	145	25	47.5	50	6	2.8	7	3.0	M8	6×45	0.10	1.35	500	147
D-25	25	52	163	29	54	55	8	3.3	7	3.0	M8	8×50	0.10	1.83	450	206
D-30	30	58	182	34	61	60	8	3.3	7	3.0	M8	10×60	0.14	2.38	410	265
D-35	35	70	212	39	70	72	10	3.3	10	3.5	M10	10×70	0.14	4.08	330	451
D-40	40	80	245	44	80	85	12	3.3	10	3.5	M10	10×80	0.14	6.21	290	637
D-45	45	88	270	49	87.5	95	14	3.8	12	3.5	M10	12×90	0.20	8.06	260	902
D-50	50	95	290	54	95	100	14	3.8	12	3.5	M12	12×100	0.20	10.02	240	1079
D-60	60	115	340	66	110	120	18	4.4	15	5.0	M12	13×120	0.20	17.33	200	1667

※You may download 3D CAD drawings by clicking on the part number of interest.