Products

Standard Type Universal Joint

Join Slide SPSS Series

  • The spline effective length should be carefully considered when you cut a sleeve and a shaft.
  • This type can be used for the application where sliding movement occurs while rotating.
  • SPSAS Unit
    Material SUS304・SPSS (spline shaft)・SPAS (spline sleeve) with boss

    SPSOS Unit
    Material SUS304・SPSS (spline shaft)・SPOS (spline sleeve)

■Type SPSAS Dimension Table

SPSAS-6 Large diameter6m=0.5 Z=10 6 150 60 90 6 12.5 13 43.5 8.5 25
SPSAS-8 Large diameter8m=0.5 Z=14 8 300 70 230 8 16 16.5 50.5 10.5 30
SPSAS-10 Large diameter10m=0.5 Z=18 10 300 80 220 10 20 17 65 20 35
SPSAS-12 Large diameter12m=0.75 Z=14 12 400 80 320 12 24 22 80 25 35
SPSAS-16 13×16×3.5×6 16 400 75 325 16 32 23 95 30 40
SPSAS-20 18×22×5.0×6 22 600 90 510 20 40 28 110 40 45

■Type SPSOS Dimension Table

SPSOS-6 Large diameter6m=0.5 Z=10 6 150 60 90 12.5 8 38.5 8.5 25 5
SPSOS-8 Large diameter8m=0.5 Z=14 8 300 70 230 16.1 10 45.5 10.5 30 5
SPSOS-10 Large diameter10m=0.5 Z=18 10 300 80 220 20.1 12 60 20 35 5
SPSOS-12 Large diameter12m=0.75 Z=14 12 400 80 320 24.1 14 70 25 35 10
SPSOS-16 13×16×3.5×6 16 400 75 325 32 20 80 30 40 10
SPSOS-20 18×22×5.0×6 22 600 90 510 40 25 95 40 45 10

※You may download 3D CAD drawings by clicking on the part number of interest.