miyoshi kikai | Products | Standard Type Universal Joint

- Complying with JIS & Original Type
  The standard joint which is used in industrial equipment.
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
  
  Dimensional drawing by shape
- It is a joint system part for multi-purpose.
  
  PIJON LIST

Anti-wear Type HJ

bootsBoots
axisAxial attachment
additionAdd process
60°Most curve angle Up to 60°
30°Most curve angle Up to 30°

JIS-B1454typeC Material SCM415　　　Entirely Quenched, Anti-wear Use

In order to increase the fatigue strength, parts are entirely quenched.
Parts cannot be machined because they are entirely quenched.
Use a boot and oil pack to extend the life of joint.
Designate new JIS or old JIS for key, when the type of shaft-hole shape is T.
A strong-pin or a shear-pin is not attached for a joint with a key way.

■Type HJ Dimension Table

　

Attachment：strong-pin 1 piece、shear-pin1 piece、check ring 2 pieces

	φd^H7	φD	L	ℓ	e	φP^H8 m6	New JIS key		Old JIS key		TAP M	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
	φd^H7	φD	L	ℓ	e	φP^H8 m6	a^E9	b	a^E9	b	TAP M	Swing of the center	Mass kg	Max. revolution min^-1	Max. transmission torque capacity N・m
HJ-6	6	12	31	9	4.5	3	-	-	-	-	-	0.10	0.02	1800	8
HJ-8	8	15	36	10	5	3.5	3	1.4	3	1.5	M3	0.10	0.03	1700	13
HJ-10	10	19	42	11	6	4.5	3	1.4	4	1.5	M4	0.10	0.06	1400	30
HJ-12	12	23	52	13	7.5	5	4	1.8	4	1.5	M4	0.10	0.11	1100	39
HJ-14	14	26	59	16	8.5	5.8	5	2.3	5	2.0	M5	0.10	0.16	1000	58
HJ-16	16	30	74	20	11	6.5	5	2.3	5	2.0	M5	0.10	0.27	850	91
HJ-18	18	33	81	23.5	11.7	7	6	2.8	5	2.0	M6	0.10	0.34	800	137
HJ-20	20	36	87	25	12.5	8	6	2.8	5	2.0	M6	0.10	0.43	700	177
HJ-22	22	40	94	27	13.5	9	6	2.8	7	3.0	M8	0.15	0.57	650	235
HJ-25	25	44	105	30	15	10	8	3.3	7	3.0	M8	0.15	0.75	600	324
HJ-30	30	51	122	35	17.5	11.5	8	3.3	7	3.0	M8	0.15	1.17	500	481

※You may download 3D CAD drawings by clicking on the part number of interest.