Products

Related Product

Zero-coup Straight Line and Direct Connection Holder Type ZA Type Z

  • Duralumin and steel   2 kinds
  • Products with different size holes and a key way are standardized.
  • Both forward-reverse rotation and push-pull movement are possible.

Type ZA Material =Duralumin A2017

Type Z Material =Steel SUM24L・Surface treatment =Black oxide finish

※Set a shaft at a location of 1/2L.
※A cap screw for type ZA is made of SUS304.
※Tighten cap screws evenly so that swing of the center will not occur.

■Dimension Table

ZA-0303 Z-0303 3 3 10 14 5 M2×5L 4 2.5 4.5 13000 0.3
ZA-0404 Z-0404 4 4 12 16 5 M2×6L 4 3.5 7.5 12000 0.7
ZA-0403 Z-0403 3 3.5 7.5
ZA-0505 Z-0505 5 5 13 18 6 M2.6×6L 4 5.0 10.5 12000 1.4
ZA-0504 Z-0504 4 5.0 10.5
ZA-0503 Z-0503 3 5.0 11.0
ZA-0606 Z-0606 6 6 15 19 6 M2.6×8L 4 6.5 14.0 11000 2.5
ZA-0605 Z-0605 5 6.5 14.5
ZA-0604 Z-0604 4 7.0 15.0
ZA-0808 Z-0808 8 8 20 24 8 M3×10L 4 14.0 33.0 9000 6.0
ZA-0806 Z-0806 6 15.0 34.0
ZA-0805 Z-0805 5 15.0 36.5
ZA-1010 Z-1010 10 10 25 30 10 M4×15L 4 29.0 66.5 7000 12.0
ZA-1008 Z-1008 8 30.0 69.5
ZA-1006 Z-1006 6 31.0 72.5
ZA-1212 Z-1212 12 12 30 36 12 M5×15L 4 48.0 114.0 6000 20.0
ZA-1210 Z-1210 10 52.0 121.0
ZA-1208 Z-1208 8 53.5 125.0

※You may download 3D CAD drawings by clicking on the part number of interest.